岗位职责：
1、熟练使用 TRIBON 或 AM 三维设计软件，负责铁舾装专业方案设计（需配合轮机、通风系统）；为电气等各专业规划主要通道，并协同其他专业优化布局。
Proficient in using TRIBON or AM 3D design software, responsible for the
professional scheme design of ironwork (in coordination with the turbine and
ventilation systems). The main passageways are arranged for each major
such as electrical engineering, and the layout is optimized in collaboration with
other majors.
2、负责铁舾装专业各类舾装件及设备的建模与入库工作，能够独立完成各类铁舾装通道及设备的三维布置。
Be responsible for the modeling and warehousing of various outfitting parts
and equipment in the ironwork specialty, and be capable of independently
completing the three-dimensional layout of various ironwork channels and
equipment.
3、负责铁舾装设备选型、技术协议（TA）编制；与设备制造商进行技术沟通，并签订技术协议（TA）等。
Be responsible for the ironwork equipment. Accessory selection, equipment
TA writing. Have technical communication with the manufacturer and sign a TA
agreement, etc.
4、负责与客户对接铁舾装相关技术问题。
Be responsible for communicating with customers about technical issues
related to ironwork.
5、合同前方案设计阶段，负责将下游信息整合至方案中；根据不同施工场地及生产设施，牵头制定详细施工计划；协助合同前项目经理编制项目施工方案。
The pre-contract scheme design stage is responsible for incorporating
downstream information into the scheme. Take the lead in formulating detailed
construction plans based on different construction sites and production
facilities. Assist the pre-contract project manager in preparing the project
construction plan.
6、合同签订后，负责向下游传递信息直至项目交付；并将合同执行过程中积累的经验应用于后续项目的合同前设计工作。
After the contract is signed, be responsible for transmitting information to the
downstream until the project is delivered, and apply the experience gained
during the contract execution to the pre-contract design of subsequent
projects.
任职资格：
1、船舶工程、船舶原理、海洋工程等相关专业本科及以上学历。
Shipbuilding major. Principles of Ships. Marine Engineering. Bachelor's
degree or above in a relevant major.
2、能够熟练读懂各类分段结构图及总体布置图。
Be proficient in understanding various types of section structure drawings
and overall layout plans.
3、8 年以上结构或铁舾装设计经验，具备浮式生产储卸油装置（FPSO）项目建造或改造经验，有铁舾装设备选型经验；具备铁舾装专业主管经验者优先。
More than 8 years of experience in structural or ironwork design, with
experience in FPSO project construction or renovation, experience in ironwork equipment selection, and experience as a professional ironwork supervisor is preferred.
4、熟练使用 AM 软件进行熟练操作，具备 AM 软件数据库管理经验者优先；能够使用 TRIBON 或 AM 软件直接生成施工图纸。
Proficient in using AM software for clinker operation. Experience in AM
software database management is preferred. Be capable of directly generating construction drawings using TRIBON or AM software.
5、熟悉至少一家常用国际船级社规范，了解《国际海上人命安全公约》（SOLAS）等常见国际公约，能够完成铁舾装详细设计或生产设计工作。
Be familiar with the norms of at least one commonly used international
classification society, be familiar with common international conventions such as SOLAS, and be capable of completing detailed design or production design work for ironwork.
6、熟悉常见铁舾装设备、舾装件及设计要点、参数。
Be familiar with common iron equipment, outfitting parts, design key points
and parameters.
7、能够独立翻译、阅读和理解英文资料，并能进行日常英语技术沟通。
Be capable of independently translating English materials. Read and
understand, and be able to conduct daily English technical communication.
8、了解下游设计、技术及生产流程，能够通过协商达成共识。
Understand downstream design. Technology. Production process, and be
able to reach a consensus through negotiation.
9、了解并行专业知识，能够协同完成方案设计。
Understand parallel majors and be able to collaborate to complete scheme
design.
10、硬性要求：须有FPSO相关经验。
Mandatory Requirement: Must have FPSO-related experience.