岗位职责：
1. Lead the cause analysis and improvement of the yield/efficiency abnormality of the station to reach the KPI target;
1.主导本工位的良率/效率异常的原因分析和改善，达到KPI目标;
2. Take the lead in dealing with the production line abnormalities. If they can't deal with them in time, they will send them to the manager and team for negotiation
2.主导对产线异常处理，处理不了及时highlihgt给经理和team协商解决.
3. Leading station parameter setting/programming tool optimization/process selection/production line sample board/productivity optimization/production line yield improvement/process and equipment research, and DOE testing for tracking, data collection, analysis and feedback.
3.主导工位参数设定/程序编写工具优化/工艺选择/产线样品板/产能优化/产线良率改善/制程及设备研究,DOE测试进行跟踪与收集数据分析和反馈。
4. Write and update work instructions (including maintenance);
4.撰写和更新工位作业指导书（含保养）等;
5. Equipment incoming inspection, installation, calibration and measurement equipment CPK&GRG, fault repair support and maintenance;
5.设备进货检验、安装校准测量设备CPK&GRG、故障维修支持、维护;
6. Assist in the evaluation of new process and new equipment at the station;
6.协助新制程及工位新设备的评估;
7. Product failure analysis, analyze the quality problems in each stage (trial production, mass production, market feedback), and provide analysis plans;
7.产品失效分析，对各个阶段（试产,量产,市场反馈）的质量问题进行分析，给出分析方案;
8. Simulation and optimization of leading station CT and cost assessment
8.主导工位CT及成本评估的模拟及优化
9. Assist PDE in identifying and solving risks such as design/material/process of new products at NPI stage
9.协助PDE在NPI阶段对新产品的设计/材料/工艺等风险识别并解决
10. LQ related data shall be reviewed and submitted to the team to ensure that the station can meet the needs of LQ smoothly.
10.LQ相关资料审核并提交给Team及确保工位顺畅满足LQ的需求。
11. Report to the engineering manager and complete the tasks assigned by the manager
11.汇报给工程经理并完成经理分配的任务.
岗位要求：
1. Bachelor degree or above;
1.本科及以上学历;
2. Fluent in English reading and writing;
2.英文读写流利;
3. Master SMT assembly process and FPC process specification;
3.精通SMT组装工艺，了解FPC工艺规范;
4. Understand relevant knowledge of process materials and reliability failure analysis;
4.了解工艺材料及可靠性失效分析相关知识;
5. Skilled equipment maintenance and programming ability, including printing machine (DEK, MPM)/mounting machine (YAMAHA series, Panasonic series)/reflow machine (BTU/VITRONICS/ERSA)/automatic dispensing machine;
5.熟练的设备维护和编程能力,包含印刷机(DEK,MPM)/贴片机(YAMAHA系列,松下系列)/回流机(BTU/VITRONICS/ERSA)/自动点胶机;
6. Be familiar with SMT manufacturing process, be able to analyze product defects and propose improvement methods according to equipment and fixture capabilities;
6.熟悉SMT制造工艺,能根据设备,夹具能力分析产品 缺陷并提出改善方法;
7. Master and use DOE;
7.掌握并使用DOE;
8. Quality improvement process and data analysis methods (such as seven QC techniques, DFMEA, PFMEA, CP, QCC, 6Sigma, etc.);
8.质量改善流程与数据分析方法（如QC七大手法，DFMEA 、PFMEA、CP、QCC、6Sigma等);
9. Understand the R&D project management including EI/ESI, NPI/TPI, and product import related processes and input and output components;
9.了解研发项目管理含 EI/ESI、NPI/TPI、及产品导入相关流程和输入输出件;
10. Master FMEA and Control Plan;
10.掌握 FMEA, Control Plan;
11. Understand 6 Sigma and lean production;
11.了解6西格玛，精益生产;
12. Be familiar with SPC, MSA and other statistical control methods;
12.熟悉SPC,MSA等统计控制方法;
13. Understand ISO 9000, TS16949, ISO 14000, QC080000;
13.了解ISO 9000, TS16949, ISO 14000,QC080000;
14. SMT related work experience of more than 5 years, and SMT equipment experience of more than 3 years
14.SMT相关工作经验5年以上，3年以上SMT设备经验.