Position/Title:

LDG Overhaul Certifying Engineer

起落架大修放行工程师

Location:

Xiamen, China

中国·厦门

About the Job:

The Landing Gear Overhaul MRO Certifying Staff is a critical role responsible for ensuring the quality and airworthiness of landing gear systems post - overhaul, repair, or replacement. This position involves inspecting, certifying, and approving the work performed on aircraft landing gear assemblies in compliance with aviation regulations, OEM specifications, and company standards.

The role requires close collaboration with technicians, engineers, and quality control personnel to maintain operational excellence, safety, and regulatory compliance.

起落架大修维修放行人员是一个关键岗位，负责确保起落架系统在大修、维修或更换后的质量与适航性。该职位涉及依据航空法规、原始设备制造商（OEM）规范以及公司标准，对飞机起落架组件所开展的工作进行检查、认证和批准。

此岗位要求与技术人员、工程师及质量控制人员密切协作，以维持卓越运营、保障安全并确保合规。

Educational Requirements:

Bachelor's degree or above in Mechanical /Aerospace Engineering or related fields.

本科或以上学历，机械或航空航天相关专业。

Language Skill:

Proficient in reading, writing, and understanding Aviation English.

精通航空英语的读写与理解。

Qualification requirements

Minimum (8) years working experience in Aviation industry. (5) years of which is in the field of aviation maintenance including 12 months of practical experience in the specific component area/workshop.

(3) years in the field of aviation maintenance for complex components such as engine/APU and landing gears including 24 months experience in the specific component maintenance area/workshop.

Minimum (2) years’ experience issuing FAA 8130 or EASA F1 or CAAC 038 for ATA Chapter 32 (Landing Gears)

至少 8 年航空业工作经验。其中 5 年需在航空维修领域，包括在特定部件领域 / 车间有 12 个月的实践经验。

至少 2 年为 ATA 第 32 章（起落架）颁发 FAA 8130 或 EASA F1 或 CAAC 038 文件的经验

Certification requirements:

Must hold valid aircraft maintenance license (CAAC or FAA or EASA) Part 66

Must have EASA Part 66 M9 & M10 training within the last 2 years.

Must have EWIS training certificate training within the last 2 years

SMS and Aviation Regulation training within the last 2 years.

必须持有有效的飞机维修执照（中国民航局 CAAC 或美国联邦航空局 FAA 或欧洲航空安全局 EASA 颁发的第 66 部执照）

在过去 2 年内必须完成 EASA 第 66 部 M9 和 M10 培训。

在过去 2 年内必须持有电气线路互联系统（EWIS）培训证书

在过去 2 年内完成安全管理体系（SMS）和航空法规培训。

Job Responsibilities:

• Certify the airworthiness of overhauled landing gear assemblies and components in compliance with aviation regulatory authorities (e.g., EASA, FAA, CAAC).

• Issue appropriate release - to - service certificates (e.g., FAA 8130 - 3, EASA Form 1) for landing gear following maintenance activities.

• Conduct final checks to ensure that all maintenance and overhaul activities comply with regulatory and OEM specifications.

• Review and ensure all maintenance records, work orders, and inspection reports are complete and accurate.

• Verify that all parts used in the overhaul process meet traceability and certification requirements.

• Maintain detailed documentation of certifications and repairs in the company’s maintenance system.

• Supervise and verify functional testing of landing gear systems, including
retraction/extension testing, hydraulic pressure testing, and shock absorption
testing.

• Confirm that all components operate within specified tolerances during load and pressure tests.

• Ensure all maintenance activities comply with aviation regulations, including EASA Part 145, FAA 14 CFR Part 43, and company quality manuals.

• Stay updated on regulatory changes and incorporate them into daily operations and certification processes.

• Participate in internal and external quality audits to ensure compliance with regulatory requirements.

• Address and resolve non - conformances identified during inspections or audits.

• Act as a liaison between the company and regulatory bodies during inspections or investigations.

• Provide technical support to technicians and engineers during complex overhaul procedures.

• Assist in diagnosing issues, troubleshooting problems, and implementing solutions related to landing gear systems.

• Collaborate with the engineering team to improve maintenance procedures and optimize workflows.

• Train and mentor technicians on proper overhaul and inspection techniques.

• Conduct regular briefings to update team members on regulatory changes, best practices,and safety measures.

• 依据航空监管机构（如 EASA、FAA、CAAC）的要求，对大修后的起落架组件和部件进行适航认证。

• 在起落架维护活动完成后，颁发适当的放行投入使用证书（如 FAA 8130 - 3、EASA 表格 1）。

• 进行最终检查，确保所有维护和大修活动符合法规和 OEM 规范。

• 审查并确保所有维护记录、工单和检查报告完整且准确。

• 核实大修过程中使用的所有部件符合可追溯性和认证要求。

• 在公司维护系统中维护详细的认证和维修文档。

• 监督并核实起落架系统的功能测试，包括收放测试、液压压力测试和减震测试。

• 确认在负载和压力测试期间所有部件均在规定公差范围内运行。

• 确保所有维护活动符合航空法规，包括 EASA 第145 部、FAA 14 CFR 第43 部以及公司质量手册。

• 及时了解法规变化，并将其融入日常运营和认证流程。

• 参与内部和外部质量审核，确保符合法规要求。

• 处理并解决在检查或审核过程中发现的不符合项。

• 在检查或调查期间，作为公司与监管机构之间的联络人。

• 在复杂的大修程序中为技术人员和工程师提供技术支持。

• 协助诊断问题、排除故障并实施与起落架系统相关的解决方案。

• 与工程团队合作，改进维护程序并优化工作流程。

• 培训并指导技术人员正确的大修和检查技术。

• 定期进行简报，向团队成员通报法规变化、最佳实践和安全措施。。

Specific Job Skills:

• Reliability,diligence, and accuracy.

• A high sense of the position’s responsibility, integrity, behavior, and attitude
towards safety.

• Ability to determine required qualification for task performance.

• Ability to identify and rectify existing and potential unsafe conditions.

• 可靠、勤奋、准确。

• 对该职位的责任、诚信、行为和安全态度有高度的认识。

• 具备确定执行任务所需资质的能力。

• 具备识别并纠正现有和潜在不安全状况的能力。

Reporting Line:

Production manager

生产经理