Key Responsibilities

主要职责

成功的候选人将负责对进行中的项目机械运营进行全面审查和日常监督，包括：

1. Shop Drawings & Design Inspection 1. 施工图与设计检查

• Plan Reviews for Technical Accuracy: Critically examine current product mechanical designs, duct diagrams, load calculations (heating/cooling), and equipment specifications prior to installation to ensure compliance with relevant US/Canadian mechanical and building codes (e.g., IMC, UMC) and best practices.
  
• 技术准确性方案审查： 在安装前，严格审查当前产品的机械设计、风管图、负荷计算（供暖/制冷）和设备规格，以确保符合相关的美国/加拿大机械和建筑规范（例如，IMC、UMC）及最佳实践。
  
• Plan Reviews for Product Alignment and Accuracy: Evaluate and review mechanical shop drawings for completeness and conformance to the approved modular designs issued for fabrication.
  
• 产品一致性与准确性方案审查： 评估和审查机械施工图的完整性，确保其符合批准用于制造的模块化设计。
• Must have experience redlining and reviewing mechanical shop drawings.
• 必须具有批注和审查机械施工图的经验。
  
• Verification Lab Testing Coordination: Help prepare samples of key mechanical components (e.g., fan coils, vents, dampers) received at the Subcontractor facility for 3rd party laboratory verification testing.
  
• 验证性实验室测试协调： 协助准备在分包商设施收到的关键机械部件（例如，风机盘管、通风口、风阀）样品，以供第三方实验室进行验证性测试。

2. Process Optimization & Training 2. 流程优化与培训

• Process Mapping: Review and revise the current workflow for modular mechanical (HVAC and ventilation) installation, testing, and quality control.
  
• 流程梳理： 审查和修订当前模块化机械（暖通空调和通风）安装、测试和质量控制的工作流程。
• Suggest improvements or efficiencies where necessary, focusing on airtightness, energy efficiency, and consistency.
• 在必要时提出改进或提高效率的建议，重点关注气密性、能源效率和一致性。
  
• Techniques & Equipment: Evaluate existing tools, testing equipment (e.g., airflow meters, balancing hoods), and worker techniques in use for duct installation, sealing, component connection, and system commissioning.
  
• 技术与设备： 评估用于风管安装、密封、部件连接和系统调试的现有工具、测试设备（例如，风速计、平衡罩）和工人技术。
• Recommend specific upgrades, additions, training, or modifications to improve process efficiency and consistency.
• 推荐特定的升级、增补、培训或修改，以提高流程效率和一致性。
  
• Training and Mentorship: Lead hands-on and classroom training sessions for the mechanical teams on code requirements, best practice installation techniques for ductwork and refrigerant lines, safety protocols, and quality standards.
  
• 培训与指导： 为机械团队主导关于规范要求、风管和制冷剂管线的最佳实践安装技术、安全协议和质量标准的实践操作及课堂培训课程。

3. Quality Assurance & Standards Development 3. 质量保证与标准制定

• Quality Control (QC) Program: Review and enhance the current QC Inspection and Testing Plans, project quality criteria, and mechanical quality control documentation processes.
  
• 质量控制 (QC) 计划： 审查和加强当前的 QC 检查和测试计划、项目质量标准以及机械质量控制文件流程。
• This must include duct leakage testing, airflow verification, and final system start-up and commissioning sign-offs.
• 这必须包括风管泄漏测试、气流验证以及最终系统启动和调试签核。
  
• Defect Root Cause Analysis: Identify and troubleshoot common mechanical defects such as duct leaks, improper refrigerant charge, poor air balance, or vibration issues, and develop preventative measures or appropriate repair/rework procedures.
  
• 缺陷根本原因分析： 识别和排除常见的机械缺陷，如风管泄漏、制冷剂充注不当、空气平衡不良或振动问题，并制定预防措施或适当的维修/返工程序。
  
• Standard Operating Procedures (SOPs): Develop clear, visual, and concise SOPs for all critical steps in mechanical installation, testing, and quality control where these SOPs don’t already exist in the company system.
  
• 标准操作程序 (SOP)： 针对机械安装、测试和质量控制中的所有关键步骤，在公司系统尚不存在SOP的地方，制定清晰、可视化和简洁的SOP。

Qualifications

资格要求

• Nationality/Residency: Chinese.
  
• 国籍/居住地： 中国籍。
  
• Experience: A minimum of 3 years of hands-on experience in commercial or residential HVAC/mechanical systems, with a focus on new construction or industrial facility systems management.
  
• 经验： 至少 3 年商业或住宅暖通空调/机械系统的实践经验，重点是新建或工业设施系统管理。
  
• Technical Expertise:
  
  • Deep knowledge of governing US/Canadian mechanical codes (e.g., IMC, UMC) and their implementation during factory installation and pre-site readiness.
  • 深入了解美国/加拿大现行机械规范（例如，IMC、UMC）及其在工厂安装和现场准备期间的实施。
  • HVAC Technician License or equivalent recognized professional certification in a North American or Western European jurisdiction is highly sought after.
  • 北美或西欧司法管辖区的暖通空调技术员执照或同等公认的专业认证将获高度青睐。
  • Experience or qualification with IMC, UMC, ASHRAE, or ISO mechanical codes and standards will be strongly considered.
  • 具备 IMC、UMC、ASHRAE 或 ISO 机械规范和标准的经验或资格将获重点考虑。
  • Expertise in overseeing procedure qualification and technician training/certification.
  • 在监督程序认证和技术员培训/认证方面拥有专业知识。
  • Comprehensive understanding of forced-air systems, heat pump technology, energy recovery ventilation, and refrigerant handling.
  • 全面了解强制通风系统、热泵技术、能量回收通风和制冷剂处理。
• 技术专长：
  
• Modular/Factory Experience (Preferred): Experience working on modular, prefabricated, or production-line construction projects is a significant asset.
  
• 模块化/工厂经验（优先）： 具备模块化、预制或流水线建设项目的工作经验者优先。
  
• Training & Communication: Proven ability to effectively train, mentor, and communicate technical information to diverse multi-lingual teams.
  
• 培训与沟通： 已证实的能够向多元化的多语言团队有效培训、指导和传达技术信息。
  
• Physical Requirements: Ability to be on a factory floor for extended periods, including climbing stairs/ladders and withstanding production-line environments as required.
  
• 身体要求： 能够长时间在工厂车间工作，包括根据需要爬楼梯/梯子并承受流水线环境。
  
• Technological Capacity: Must have some experience with mobile phones and tablets and be able to contribute to the digital record-keeping systems in place at the company.
  
• 技术能力： 必须具备使用手机和平板电脑的经验，并能为公司现有的数字记录保存系统做出贡献。

Compensation and Logistics

薪酬与后勤

• Contract Duration: 1 year.
  
• 合同期限： 1 年。
  
• Compensation: Competitive salary commensurate with experience and expertise.
  
• 薪酬： 提供与经验和专业知识相匹配的有竞争力的薪水。
  
• Logistics: All travel, accommodations, and work-related expenses will be covered by the company.
  
• 后勤： 所有差旅、住宿和工作相关费用将由公司承担。