经验5年以上，评估合适，可应聘NPI经理（英语可作为工作语言——硬性要求）。
岗位要求：
1）Degree in Electronics or Mechanical Engineering or related field.
电子或机械工程相关专业毕业。
2）3-5 years working experience as NPI Engineer, Product Engineer or Process Engineer.
3-5年新产品导入工程师、产品工程师或工艺工程师工作经验。
3）Full understanding of FATP (Final Assembly, Test and Packaging) manufacturing processes.
充分理解FATP（总装，测试和包装）制造工艺。
4）Knowledge in capacity calculation, cycle time analysis, production line requirement (equipment, fixture, workstation quantity), Headcount analysis, line layout, material flow and work station ergonomics design.
具备产能计算，周期时间分析，生产线需求（设备，夹具，工作站数量），员工数量分析，生产线布局，物料流程和工位人体工程学设计知识。
5）LEAN knowledge is an advantage.
有精益知识优先考虑。
6）Able to use Auto-CAD SW and 3D Software such as ProE, Solidworks or UG.
会使用Auto-CAD软件和3D软件，如ProE， Solidworks或UG。
7）Proficient in MS SW (Excel, PowerPoint, Word, Visio).
熟练使用MS软件（Excel, PowerPoint, Word, Visio）。
岗位职责：
1）DFx review and analysis together with R&D.
与研发部门一起对DFx进行审查和分析.
2）Provide feedback and recommendations on the product design.
对产品设计提供反馈和建议.
3）Provide robust manufacturing process.
提供稳健的制造工艺.
4）Identify Critical process and provide the best solution.
识别关键过程并提供最佳解决方案。
5）Propse the most suitable machine, equipment and fixture for all identified critical process.
为所有确定的关键工序提出最合适的机器、设备和夹具。
6）Lead review and approval of assembly Fixture Design.
领导装配夹具设计的审核和批准。
7）Conduct PoC on new assembly processes and process automation.
对新的装配工艺和工艺自动化进行PoC。
8）Lead the DOE and work together with ME and R&D for proper machine parameter and consumable items usage and processing.
领导DOE，并与ME和R&D一起制定正确的机器参数和消耗品的使用和处理。
9）Lead production line preparation (machines, test station, assembly fixtures, consumable items etc.).
领导生产线的准备工作（机器，试验台，装配夹具，消耗品等）。
10）Lead Assembly Station Qualification (CPK for machines qualification).
领导装配站认证（机器认证CPK）。
11）Support Test Station Qualification (GRR).
支持试验站资格（GRR）。
12）Lead Line Qualification (based on target Yield, UPH, HC).
领先线确认（基于目标良率，UPH， HC）。
13）Lead Failure Analysis of defective products in all phases of NPI to 1st mass production.
从新产品导入到第一次量产的所有阶段，领导缺陷产品的失效分析。
14）Lead, coordinate, implement and verify corrective actions.
领导，协调，实施和验证纠正措施。
15）Lead the builds and provide build report.
领导构建并提供构建报告。
16）Lead team meeting every build (focus on product & process design and development).
领导团队召开每次构建会议（专注于产品和工艺设计和开发）。
17）Lead the transition from NPI to mass production stage (MP2).
领导从新产品导入到量产阶段（MP2）的过渡。
18）Ensure Yield target achieved.
确保达成产量目标。
19）Ensure that UPH verified and met the target.
确保UPH验证并达到目标。
20）Ensure correct number of HC achieved (CBD vs Actual).
确保达到的HC数量正确（CBD vs实际）。
21）Provide additional technical training to PE, ME & Test team and production team.
为PE， ME和测试团队以及生产团队提供额外的技术培训。
22）Validate automation solution if any implemented during the NPI stage.
在新产品导入阶段验证自动化解决方案。
23）Provide list of potential continuous improvement activities to PE team (sustaining).
向PE团队提供潜在的持续改进活动清单（持续）。