JOB DESCRIPTION
岗位描述

Position: Asia R&D Center (ARDC) Laboratory Technician
职位： 亚洲研发中心实验室技工
Location: Asian R&D Center Laboratory
部门： 亚洲研发中心实验室
Reports to: Supervisor, ARDC
汇报对象： 亚洲研发中心实验室班长
Scope: Participate in the daily lab test related operations and responsibilities necessary to maintain high quality and timely support for product development and time-to-market of new products and processes.
概述：参与完成实验室日常的实验相关的工作，为产品开发和新产品与新工艺的推出提供高质量的及时的支持。

RESPONSIBILITIES to include but not limited to:
岗位职责：
1. Carry out routine work in lab and complete specific work orders and projects in the most safe&efficient method to support project schedules and production manufacturing on a day-to-day basis.
完成实验室的一些日常工作，完成指定的工作任务单，用最安全最效率的操作方法，支持项目开发与制造协助等相关工作。
2. As per assigned work orders, assemble and test products to comply with engineering specifications (hydrostatic, flex, bending moment, air, cycle, low temperature, heat aging, and any additional required tests).
根据指派的工作任务单，按照技术要求组装并开展实验（如水压实验，挠性验证实验，承受弯矩实验，气密封实验，循环疲劳实验，低温实验，高温试验和其它特定实验）
3. Inspection of cast, machined, or welded components from any Victaulic facility, foreign and domestic suppliers for defects and compliance with engineering specifications and drawings for sample approval.
为样品批准提供支持，检查来自于唯特利工厂和国内外供应商的铸件、机加工件和焊接件，查看是否有缺陷、是否与技术要求一致。

4. Inspection and/or testing of sample gaskets and elastomer components from foreign and domestic vendors and Victaulic elastomer producing facilities for defects and compliance with engineering specification and drawings for mold and tooling approvals.
为模具与工装的批准提供支持，检查来自于唯特利工厂和国内外供应商的胶圈样品和橡胶零件，查看是否有缺陷、是否与技术要求一致。
5. Install necessary piping and components and operate instrumentation to measure performance in the flow test loop to comply with engineering specifications.
为进行流动实验，组装必要的管道、部件和监测仪表，检查结果是否与技术要求一致。
6. Set-up, program and operate Universal Test Machine.
组装、调试和操作常见的测试设备。
7. Operate cut-off saw, drill press, belt sander, grinder, and other machine shop equipment, as necessary, to prepare pipe for grooving, and product testing.
会操作锯床、钻床、砂轮机、角磨机和其它必要的设备者优先考虑，而为滚槽和产品测试做准备。
8. Set up and operate all Victaulic pipe preparation and grooving tools (clean and maintain, as needed).
组装和操作唯特利与管道准备有关的工具、沟槽工具等（必要时维护保养）。
9. Prepare, assemble and test Victaulic products, as necessary, for agency testing per respective specifications.
根据不同技术要求，为产品认证而准备、组装并测试唯特利产品。
10. Prepare product assemblies and perform demonstrations for customers touring the Victaulic facilities.
为客户参观、销售培训等提供产品组装与验证测试。
11. Record and maintain test results database.
真实记录并维护实验结果。
12. Workshop safety issue found , control and rectification
安全隐患发现、控制与整改。
13. Carry out the certification of various samples and the calibration of various test instruments.
完成各种样品的认证试验,检测量具的校正。
14. Daily spot check , repair , and regular maintenance of equipment , to ensure the equipment work well.
完成设备的日常点检、维修与定期保养，保证设备运转良好安全。
15. Specific policies and procedures have been established by the Engineering Department to provide for the security and accessibility of electronic data and confidential information. It is the responsibility of the employee, in the daily course of doing business, to follow said policies as they relate to document management (see EOG-26). The extent to which departmental research and development information is stored electronically has vastly increased, and will continue to do so. The new Federal rules pertaining to electronic discovery stipulate that substantive email communications constituted "records" under the Federal Records Act. It is therefore the responsibility of each departmental employee to understand their role in communicating via e-mails and that all e-mails must be written/responded to in a professional manner, as outlined in EOG-26.
遵守R&D所有相关的政策与程序。
QUALIFICATIONS:
岗位要求
1. One (1) years experience in an lab ,QA,or industrial environment.
一年实验室、质量检查或者制造车间工作经验， 优先。
2. Junior College or Higher.
大专（含）以上学历，本科优先
3. Quick mind, sincere , positive , initiative , responsibility ,safety consciousness, team work.
头脑灵活，稳重细心，积极上进，责任心强，良好的安全意识与团队合作意识
4. Experience in hydraulics, pneumatics, stamping, incoming inspection, test instrument operation, and electrical basics.
有水压、气压实验、冲压或者设备操作经验，来料检验，实验测量仪器操作经验，基本的电工经验。

5. Able to maintain records and log books.
能够准确记录与维护实验记录
6. Common computer skills in Microsoft Word, Excel, and basic English speaking skill.
具有一定的电脑软件使用能力，如Microsoft Word, Excel 等, 具有一定的英语沟通能力。
原标题：《亚洲研发中心实验室技工》