Work place: Guinea

Key Duties & Responsibilities

1. Review all QA/QC procedures of the Contractors to determine their compliance with the requirements of their respective Contracts and their adequacy for their proposed application and to notify the Contractors accordingly

2. Review and approve, alter, amend or reject all Contractors’ inspection and test plans (ITP) as it deems appropriate to the nature and service of the items to be tested

3. Monitor the Contractors’ compliance with the QA/QC requirements of their respective Contracts

4. Review and as appropriate accept the Contractors’ hold, review and witness points in the construction programme relating to each ITP and also to permit inspection and testing of work prior to it being covered up to avoid incorporation into the Facilities of material and equipment with latent defects

5. Execute inspections of materials, equipment, cable laying, terminations, and instrument installations (e.g., transformers, switchboards, lighting systems)

6. Perform functional tests (e.g., loop checks, continuity tests, insulation resistance tests, instrument calibration)

7. Verify compliance with safety standards (e.g., hazardous area installations, ATEX/EEMUA codes) and project specifications

8. Issue Quality Records, Non-Conformance Reports (NCRs), and inspection reports .

9. Update as-built drawings and maintain detailed diaries of daily activities 13.

10. Witness tests, document results, and ensure traceability (e.g., calibration records, test certifications)

11. Ensure alignment with quality plans (e.g., ITPs, QCPs) and regulatory standards (e.g., API, NFPA)

12. Promote workplace safety (e.g., lockout/tagout procedures, hazardous material handling)

Requirements

1. 5+ years in mine/oil, power plants, or industrial construction, with exposure to high-voltage systems (e.g., switchgear, transformers) 19.

2. Familiar with Conveyor, pump, material handling equipment(such as stacker, reclaimer), crusher ect.

3. Proficiency in industry standards (e.g., BS/IEC/ISO/API/ATEX) and electrical codes (e.g., NEC, NFPA 70B) 1510.

4. Hands-on experience with instrument calibration (e.g., flow meters, pressure transmitters) and hazardous area installations

5. Bachelor’s degree in Electrical Engineering, or a closely related field.

工作地点：几内亚

主要职责

1. 审查承包商的所有QA/QC程序，以确定其是否符合各自合同的要求，是否适合其拟议的应用，并相应地通知承包商

2. 审核和批准、变更、修改或拒绝所有承包商的检验和测试计划（ITP），确保它有适合于待测试项目的性质和服务

3. 监督承包商遵守各自合同的QA/QC要求

4. 审查并酌情接受承包商在与每个ITP相关的施工方案中的持有、审查和见证点，并允许在工程被掩盖之前对其进行检查和测试，以避免将具有潜在缺陷的材料和设备并入设施

5. 对材料、设备、电缆敷设、终端和仪表安装（如变压器、配电盘、照明系统）进行检查

6. 执行功能测试（例如，回路检查，连续性测试，绝缘电阻测试，仪器校准）

7. 验证是否符合安全标准（例如，危险区域安装，ATEX/EEMUA代码）和项目规范

8. 发布质量记录、不合格报告（ncr）和检查报告。

9. 更新竣工图纸，维护详细的日常活动日志。

10. 见证测试，记录结果，并确保可追溯性（例如，校准记录，测试认证）

11. 确保与质量计划（如ITPs， qcp）和监管标准（如API， NFPA）保持一致

12. 促进工作场所安全（例如，锁定/标签程序，危险材料处理）

岗位要求

1. 5年以上矿山/石油，发电厂或工业建筑工作经验，熟悉高压系统（如开关设备，变压器）

2. 熟练英文读写能力。

3. 熟悉输送机，泵，物料搬运设备（如堆料机，取料机），破碎机等配套供配电设备安装、检验及验收。

4. 精通行业标准（如BS/IEC/ISO/API/ATEX）和电气规范（如NEC， NFPA 70B） 1510。

5. 具有仪器校准（例如，流量计，压力变送器）和危险区域安装的实践经验

6. 电气工程或相关专业本科以上学历。