Job Profile: Engineering ＞ General Engineering
SUMMARY
Responsible for the Test Engineering Process and the attributes that can affect the process.
ESSENTIAL DUTIES AND RESPONSIBILITIES
- Analyze daily process yield reports that will include, but not limited to the following: operator errors, defective product, test equipment/test defects, RMA product defects, and spear corrective actions.
- Increase production yields by understanding and reducing operator errors and driving manufacturing and test engineering defects back to the appropriate department.
- Assist Test Engineer in developing preventative maintenance program and assure compliance to reduce downtime and increase process yields throughout the process.
- Analyze downtime sheets recording downtime of a station to set guidelines for preventative maintenance scheduling.
- Ensure all process manuals and documentation are maintained properly.
- Review all 5x5 tests to ensure that they were performed and adhered to.
- Perform walkthroughs, inspections, product evaluation and testing as needed.
- Conduct NPI test evaluations.
- Prevent test escapes.
- Ensure product testing completeness and reliability.
- Update and generate documentation as required.
- Assist Project Test Engineer with test process review.
- Evaluates test probes.
- Set-up equipment to perform any required programming and verification test following established procedures for the specified operations to be performed.
- Ensure quality (work meets or exceeds Jabil Workmanship Standards) and improve efficiency through the use of the SPC system when available.
- Operates automated electronic test equipment on manufactured circuit board assemblies and subassemblies.
- Responsible for maintaining a continuous flow of the manufacturing line and meeting production goals while performing the assigned test duties.
- Label and stamp boards, and fill out tags.
- Advise supervisor of any recurring test failure so that prompt corrective action may be taken.
- Ensure assemblies are properly handled and marked.
- Ensure daily logs and move/production tickets are accurately maintained.
- Follow simple, standardized and routine written directions for assigned test operations.
- Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
- Comply and follow all procedures within the company security policy.
- May perform other duties and responsibilities as assigned.
MANAGEMENT & SUPERVISORY RESPONSIBILITIES
- Typically reports to Management. Direct supervisor job title(s) typically include: Production Supervisor, Production Manager
- Job is NOT directly responsible for managing other employees (e.g., hiring/termination and/or pay decisions, performance management).
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
- Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
- Ability to write reports, business correspondence, and procedure manuals.
- Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
- Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
- Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
- Ability to define problems, collect data, establish facts, and draw valid conclusions.
- Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
EDUCATION & EXPERIENCE REQUIREMENTS
- Associates of Science in NT Electronics or Electrical Engineering or Technical Certification preferred
- Three (3) to five (5) years experience
- Or an equivalent combination of education, training or experience
工艺工程师
1.工艺流程设计与优化：负责新产品导入的工艺方案设计，制定工艺流程图相关标准与要求等。分析和优化现有生产工艺，解决生产瓶颈，提升生产效率和产品直通率。
2.工装夹具设计与开发：根据生产需要，设计或提出工装、夹具、治具的需求，并参与验收和改进，以提高生产自动化程度和操作一致性。
3.生产问题解决：快速响应并解决生产现场出现的各类技术问题（如质量缺陷、设备异常等），进行根本原因分析并实施纠正与预防措施。
4.质量控制与标准制定：制定工艺质量控制点和检验标准，确保生产过程符合质量体系要求。运用统计过程控制等工具，监控工艺稳定性。
5.成本控制： 通过工艺改进，降低物料损耗、提高设备利用率、优化人力配置，实现降本增效。
6. 技术文档编写：编写和维护各类工艺文件，如工艺卡、PFMEA、BOM等，确保文件的准确性和有效性。
7. 新设备、新技术的引进：参与新生产设备的选型、调试和验收，并负责相关操作人员和维护人员的培训。
8.具体数字化思维与能力，利用数字化手段与工具，实现工艺的优化及对相关数据进行挖掘并应用从而产生价植。
要求
1. 英语六级，具备良好的英文文档阅读与沟通能力，口语流利优先。
2.熟悉CAD/CAE制图软件，熟练使用至少一种：AutoCAD, SolidWorks, UG/NX, CATIA, Pro/E。
3.扎实的工程理论知识，有一定的自动化编程基础及工艺仿真与分析能力。
4.沟通能力强，能够主动与工作的合伙人进行沟通，达成工作的目标。
5.良好的抗压能力，具有持续学习能力及创新意识。
6. 机械、电子、自动化、工业工程、物理、电气工程相关专业，本科以上学历